Active Piping Knowledge.

  PIPING FABRICATION Pipe fabrication is  the process of welding piping components such as pipes, elbows, tees, flanges, etc., into engineered piping systems in exact accordance with our customers' design requirements . ACTIVE PIPING KNOWLEDGE   1.       Piping Materials 2.       Dimensional Tolerance 3.       Pipe Joints 4.       But Welded and Socket welded piping. 5.       Screw Piping 6.       Flange connection 7.       Branch Connection 8.       Miter Bend and Fabricated Reducer 9.       Cutting And Trimming of Standard Fittings & Pipe. 10.    Galvanised Piping 11.    Shop Fabrication. 1. Piping Materials: ·         All incoming materials shall be inspected as per approved ITP ·         Pipe, Pipe Fittings, Flange, Valve, Gasket, Stud Bolts etc all are check strictly as per PMS. ·         Materials Traceability shall be maintained for A.S, S.S, NACE, LTCS & transferring heat number. ·         Must be Colour Coadding for all piping materi

    Pipe Erection Procedure Proper planning should be made for e rect piping. 1.      All tools, equipment’s, ropes must be inspected and certified by HSE, before erection to ensure that they are safe and ready clean and free from loose contamination. 2.      Pre-Fabricated spool need to be identified and number and tagged. 3.      Pipe should be erect and support provide as per Support drawing, primary pipe supports can be welded before erection. The number of temporary supports shall be minimized. 4.      Undue stress should not be applied to the force, piping keep in the proper place. 5.      To avoid the ingress of moisture, and pipe opening should be seal  during erection. 6.      Installation of piping on pipe rack  should be done from lower elevation to higher elevation. 7.      Large bore piping shall be installed before small bore piping. 8.      Piping joint shall be properly aligned. 9.      Pipe clearance from other pipes, equipment, and structure should b